Pentens® T-007 Cement Modifier / Primer

Pentens® T-007, 100% acrylic cement modifier is based on a proven 100% acrylic polymer design to improve the chemical, corrosion, moisture and salt resistance of cement renders. It is superior to more common PVA and SBR based modifiers because of its superior durability and resistance to hydrolysis. It has been specifically formulated for use in highly alkaline cement environments. Cement mortars based on Pentens® T-007 will adhere to a wide range of materials such as metals, timber, insulation foams as well as new and old concrete.

Not only used as the waterproofing primer, but also used as an additive in cement mortars, renders, patching / repair work, GRC panels, and waterproof cementitious coatings.

Pentens® T-009 Water-based Silylated PMMA Coating

Pentens® T-009 is a PMMA – silylated polymethylmethacrylate resin based coating of good hardness, adhesion, wear resistant, scratch resistant, UV resistant, anti-corrosive sealer, primer & finish for a wide variety of exterior and interior surfaces.

Pentens® T-100 Water Based PU Bituminous Waterproofing Membrane Coating

Pentens® T-100 is a single component which is newly developed  polymer of MMA, natural rubber, and polyurethane combines with the reaction with asphalt and then being modified and further emulsified to form elastic waterproof membrane.

To provide a better water and vapor-proof in complicating application surface compare to membrane-type and ensure better integrity between applied surfaces and waterproofing coating. 

Pentens® T-200H UV-Resistant Polyurethane Coating

Pentens® T-200H is based on a newly developed Water based Polyurethane and Acrylic Polymers. It is dramatically reduces solar heat absorption in either air-conditioned or non-air conditioned buildings. It takes the majority of the heat load off a building’s skin and reduces temperatures to approximately that of outside shade. 

Pentens® T-200H  is a one-part elastomeric cross linking latex copolymer emulsion designed as exposed waterproofing coating.

Pentens® T-202 Solar Reflective Ceramic Coating

Pentens® T-202 is a single component, water based, ready mixed hollow ceramic capsules, acrylic based, coarse textured decorative and protective coating finish over prepared concrete, masonry and steel structures.

Pentens® T-305TH Flex Cementitious Coating

Pentens® T-305TH is a cement based waterproofing coating incorporates 2 polymer components. Apply directly to concrete and mortar to prevent water infiltration.

Pentens® T-305TH can be used for positive and negative side waterproofing, sealing of hair line cracks and as a protective coating against aggressive chemicals such as carbon dioxide (eg. in concrete repair work), frost and de-icing agents.

Pentens® T-308 Crystalline Admixture Waterproofing

Pentens® T-308  is a dual purpose waterproofing system which helps to waterproof the concrete in two stages namely hydrophobic and crystallization. Pentens® T-308 relies on a revolutionary technology that turns porous concrete into an impermeable barrier and provide a powerful defense against water damage and corrosion.

When added to fresh concrete, Pentens® T-308 reacts with products of cement hydration process to produce a hydrophobic material which instantly repels external water and drastically reduces water absorption into concrete.

Pentens® T-802 Waterplug

Pentens® T-802 A blend of hydraulic cements, wellgraded sands and chemical additives supplied in dry powder form to seal concrete, and masonry as a rapid setting remedy to plug active water instantly.